Dynamics of liquid membranes. II: Adaptive finite difference methods

Two domain-adaptive finite difference methods are presented and applied to study the dynamic response of incompressible, inviscid, axisymmetric liquid membranes subject to imposed sinusoidal pressure oscillations. Both finite difference methods map the time-dependent physical domain whose downstream boundary is unknown onto a fixed computational domain. The location of the unknown time-dependent downstream boundary of the physical domain is determined from the continuity equation and results in an integrodifferential equation which is non-linearly coupled with the partial differential equations which govern the conservation of mass and linear momentum and the radius of the liquid membrane. One of the finite difference methods solves the non-conservative form of the governing equations by means of a block implicit iterative method. This method possesses the property that the Jacobian matrix of the convection fluxes has an eigenvalue of algebraic multiplicity equal to four and of geometric multiplicity equal to one. The second finite difference procedure also uses a block implicit iterative method, but the governing equations are written in conservation law form and contain an axial velocity which is the difference between the physical axial velocity and the grid speed. It is shown that these methods yield almost identical results and are more accurate than the non-adaptive techniques presented in Part I. It is also shown that the actual value of the pressure coefficient determined from linear analyses can be exceeded without affecting the stability and convergence of liquid membranes if the liquid membranes are subjected to sinusoidal pressure variations of sufficiently high frequencies.     

Comparison of steam pretreatment of eucalyptus,aspen, and spruce wood chips and their enzymatic hydrolysis

Applied Biochemistry and Biotechnology - Enzymatic hydrolysis of SO2-impregnated, steam-explodedEucalyptus viminalis was carried out at increasing substrate concentrations and enzyme loadings. When...     

The diastereoselective synthesis of functionalised isoxazolidines using a Cope elimination/intramolecular nitrone cycloaddition strategy

Functionalised hydroxylamine derivatives of (S)-prolinol prepared by a Cope elimination have been found to undergo oxidation to the nitrone either in the presence of air or a catalytic quantity of TPAP. These undergo intramolecular cycloaddition to give tricyclic isoxazolidines with high diastereoselectivity.     

<Superscript>40</Superscript>K activities and potassium concentrations in tobacco samples of Mexican cigarettes

Nine brands of tobacco cigarettes manufactured and distributed in the Mexican market were analyzed by γ-spectrometry to certify their non-artificial radioactive contamination. Since natural occurring radioactive materials (NORM) ⁴⁰K, ²³²Th, ²³⁵U, and ²³⁹U (and decay products from the latter three nuclides) are the main sources for human radiation exposure, the aim of this work was to determine the activity of ⁴⁰K and potassium concentration. Averages of ⁴⁰K and potassium concentration were of 1.29±0.18 Bq·g⁻¹, and 4.0±0.57%. The annual dose equivalents to the whole body from ingestion and inhalation of 26 Bq ⁴⁰K were 0.23 μSv and 15.8 μSv, respectively. The corresponding 50 years committed dose equivalents was 0.23 μSv. The total committed dose to the lungs due to inhalation of ⁴⁰K in tobacco was 16 μSv. Potassium concentrations obtained in this work were in the same range of those obtained by INAA, so showing that the used technique is acute, reproducible, and accessible to laboratories equipped with low background scintillation detectors.     

Annealing effects on the magnetization of Co–Ni–B amorphous nanoparticles

Chemically prepared (Co_xNi_1−x)_1−yB_y (x=0.5, 0.75, 1; y≈0.4) amorphous fine particles were characterized by X-ray diffraction, DTA and TGA, and in situ magnetic measurement as a function of annealing temperature in an inert atmosphere. Magnetic measurement performed in as-prepared and 150°C annealed samples shows an increase of the saturation magnetization and magnetic moment after thermal treatment. Room temperature magnetization increases by factors of 3.5, 1.8, and 1.5, for x=0.5, 0.75, and 1, respectively. These measurements may indicate a local re-ordering of the amorphous phase at temperatures much lower than the full crystallization temperature.     

The search for a new model structure of β-Factor XIIa

We present the search for a new model of -factor XIIa, a blood coagulation enzyme, with an unknown experimental 3D-structure. We decided to build not one but three different models using different homologous proteins as well as different techniques and different modellers. Additional studies, including extensive molecular dynamics simulations on the solvated state, allowed us to draw several conclusions concerning homology modelling, in general, and -factor XIIa, in particular.     

Compositional Profiles in Silica-Based Sol-Gel Films Doped with Erbium and Silver, by RBS and ERDA

Photosensitive organic-titania hybrid materials have been prepared from metal alkoxides and various organic ester compounds with double bonds. The refractive index of the film increases with the decrease of the concentration of the organic ester compound, and the highest refractive index of 1.62 is obtained when 2-hydroxymethyl acrylate (HOA) is used as the organic ester and the molar ratio of HOA to Ti is 0.5. The material with the highest refractive index is exposed to femtosecond pulse using the multi-beam laser interference technique. After laser irradiation, the irradiated parts of the material are photopolymerized and periodic structures can be obtained by development of the unirradiated parts. In the case of laser irradiation of 120 J total energy for 5 min, the periodic structure obtained corresponds to 2D photonic crystal structure which is composed of two parts; the material with the highest refractive index and the air.     

Environmental UV‐A and UV‐B Threshold Doses for Apoptosis and Necrosis in Humans Fibroblasts¶

Apoptosis involves a highly organized and programmed series of events aimed at maintaining genomic stability by eliminating defective host cells. The purpose of this study was to determine the threshold doses and environmental UV‐A and UV‐B exposure times necessary to produce apoptosis and necrosis in the normal cells of a human fibroblast cell line. Enviromental UV‐A and UV‐B doses were measured over a 6 year period with a four‐channel UV radiometer. The fibroblasts were irradiated once using an Oriel UV Solar Simulator with six doses of environmentally‐based UV. Doses corresponded to 0,11,19,23 and 45 min of average environmental UV‐A and UV‐B radiation at solar noon in Puerto Rico. The Annexin‐V binding method was used to differentiate between normal fibroblasts and apoptotic or necrotic fibroblasts. The threshold dose from apoptosis to necrosis was found between 24–28 kJ/m², which corresponded to 19 and 23 min of environmental UV‐A and UV‐B exposure. This study provides the first data that specify the environmental threshold doses of UV‐A and UV‐B at which human fibroblasts undergo apoptosis and necrosis. These results may provide valuable dose‐response thresholds for apoptosis and necrosis for future mechanistic studies and baseline data for skin cancer prevention programs.